D-type Water Tube Oil & Gas Fired Boiler

Product Detail

Wuxi Zozen Boilers Co., Ltd is one of the best boiler manufacturers and suppliers inChina, producing environmental and energy-saving products. If you need our boiler products or services, please feel free to contact us. We also like to set up partnership if you are capable and interested for cooperation. 




D-type Water Tube Oil & Gas Fired Boiler

? Boiler parameter range:

SZS2~65t/h,SZS7~70MW?

? Technical characteristics:

This type of boiler is of double drum, vertical arrangement and “D” type furnace design with 1 or 2 burners located where the front wall stands. Inside it has an air-tight furnace structure with densely arranged tubes and air-proof casing. Outside it is covered with insulation materials and convex color plates. The flue gas takes a U turn. It goes into the 1st convection tube bank from the furnace, turns after passing the flue, and flows into the economizer with finned tubes when leaving the 2nd convection tube bank. The water which goes into the upper drum from the economizer is turned into steam by means of natural circulation after passing the convection tube bank and water cooled wall, and then supplied to the user via the main steam valve. Combustion at a slight positive pressure allows for a furnace volume heat release rate as large as nearly 40×103kcal.h/m3. Upper and lower drums and convection tube banks are assembled and subjected to a hydrostatic test prior to delivery. The steam boiler has a capacity of 2~75t/h and working pressure of 0.7~5.4Mpa, while the hot water boiler has a capacity of 0.7~21MW. The feedwater and return water temperatures are 95?/70? and 115?/70? respectively.

The boiler has the characteristics of small volume, compact structure, high combustion efficiency, convenient installation , high degree of automation, etc.

Adopting micro positive pressure combustion to improve the thermal efficiency and reduce the operation cost

Upper drum adopts F 1000 - F 1200 diameter to increase the separation height and guarantee the quality of steam

Boiler flue gas partition wall adopt seal membrance structure not only improve sealing and prevent short circuit  but also increase flue gas and improve the utilization ratio of steel and effectively reduce the size of our boiler.

holes are pre-opened on membrane wall baffles for timely inspection and repair. The inspection of convection tube banks is no longer a problem. 

Convection tube banks are assembled with special tooling/fixtures, and must pass a hydrostatic test prior to delivery. It not only reduces the installation workload, but also ensures the boiler quality.

The structure design of densely arranged tubes and membrane wall with finned tubes ensures that it would never go overheating outside the furnace tube wall, and the sealing would be maintained. The temperature of insulation and sealing steel plates would not go over 250?, which ensures the sealing steel plates’ ability of oxidation corrosion resistance.

The design of internal seal casing and external embossed casing not only ensures good sealing, but also gives the boiler a better appearance

.

? Technical Specifications of SZS Series Oil/Gas-fired Steam Boiler:

Parameter/Data			Model	Model	Model
			SZS2-2.5-Y?Q	SZS4-2.5-Y?Q	SZS6-2.5-Y?Q
Rated evaporation capacity		t/h	2	4	6
Rated working pressure		MPa	2.5	2.5	2.5
Rated Steam temp.		°CC	226	226	226
Water feeding temp.		°CC	20	60	60
Boiler heating area	Radiate heating area	m2	13.5	20.28	30.25
	Convection tube bundle	m2	30.2	66.5	103
	Economizer	m2	32.7	43.6	104.64
Flue gas Temp.		°CC	164	162	165
Thermal efficiency of gas-fired boiler		%	˜93	˜93	˜93
Fuel available		/	Light oil/Heavy oil/Natural gas/Liquefied gas/City gas
Ringeiman blackness		/	< Class 1	< Class 1	< Class 1
Fuel consumption	Light oil	kg/h	126	252	378
	Natural gas	Nm3/h	151	301	420
Overall dimension of boiler assembled(L*W*H)		m	8.5x3.5x4.7	10.5x3.5x4.7	12.5x3.5x4.7
Main steam value(DN )		mm	65	100	125
Water feeding pipe(DN )		mm	50	50	50

Parameter/Data			Model	Model	Model
			? SZS10-1.25-Y?Q      SZS10-1.25/350-Y?Q	SZS15-1.6-Y?Q	? SZS20-2.5-Y?Q      SZS20-2.5/350-Y?Q
Rated evaporation capacity		t/h	10	15	20
Rated working pressure		MPa	1.25	1.6	2.5
Rated Steam temp.		°CC	194	204	226
Water feeding temp.		°CC	105	105	105
Boiler heating area	Radiate heating area	m2	38	50.24	70
	Convection tube bundle	m2	154.1	193.25	350
	Economizer	m2	52.32	136	378
Flue gas Temp.		°CC	165	160	168
Thermal efficiency of gas-fired boiler		%	˜93	=93	˜93
Fuel available		/	Light oil/Heavy oil/Natural gas/Liquefied gas/City gas
Ringeiman blackness		/	< Class 1	< Class 1	< Class 1
Fuel consumption	Light oil	kg/h	630	930	1270
	Natural gas	Nm3/h	700	1050	1406
Overall dimension of boiler assembled(L*W*H)		m	10x3.9x4.5	10.1x6.02x6.4	13x6.58x5.92
Main steam value(DN )		mm	150	150	150
Water feeding pipe(DN )		mm	50	65	80

Parameter/Data			Model	Model	Model
			SZS25-2.5-Y?Q	SZS30-2.0-Y?Q	? SZS35-1.6-Q      SZS35-1.27/350-Y
Rated evaporation capacity		t/h	25	30	35
Rated working pressure		MPa	2.5	2	1.6
Rated Steam temp.		°CC	226	215	204
Water feeding temp.		°CC	105	105	105
Boiler heating area	Radiate heating area	m2	75	80.3	82.42
	Convection tube bundle	m2	372	398	332.9
	Economizer	m2	390	431	691.8
Flue gas Temp.		°CC	165	162	144
Thermal efficiency of gas-fired boiler		%	˜93	˜93	=93
Fuel available		/	Light oil/Heavy oil/Natural gas/Liquefied gas/City gas
Ringeiman blackness		/	< Class 1	< Class 1	< Class 1
Fuel consumption	Light oil	kg/h	1575	1890	/
	Natural gas	Nm3/h	1750	2150	2450
Overall dimension of boiler assembled(L*W*H)		m	11.25x6.76x6.33	12.56x7.92x6.35	16x5.54x6.35
Main steam value(DN )		mm	150	200	200
Water feeding pipe(DN )		mm	80	80	80

Parameter/Data			Model	Model	Model
			SZS55-1.3/350-Q	? SZS65-1.27-Q      SZS65-2.5/400-Q	SZS75-1.6-Q
Rated evaporation capacity		t/h	55	65	75
Rated working pressure		MPa	1.3	1.27	1.6
Rated Steam temp.		°CC	350	194	204
Water feeding temp.		°CC	105	130	105
Boiler heating area	Radiate heating area	m2	118.5	135	150
	Convection tube bundle	m2	420.5	495	566
	Economizer	m2	780.6	865	950
Flue gas Temp.		°CC	150	156	158
Thermal efficiency of gas-fired boiler		%	=93	=93	=93
Fuel available		/	Light oil/Heavy oil/Natural gas/Liquefied gas/City gas
Ringeiman blackness		/	< Class 1	< Class 1	< Class 1
Fuel consumption	Light oil	kg/h	/	/	/
	Natural gas	Nm3/h	4235	4550	5158
Overall dimension of boiler assembled(L*W*H)		m	17.6x10.4x7.7	15.3x10x8.11	15.3x10.5x8.11
Main steam value(DN )		mm	250	300	300
Water feeding pipe(DN )		mm	100	125	125

Note: The data in the table are all for the boiler with mark ?.